Daily maintenance of vibrating screen

1. It is recommended to make a support frame to hang the spare screen surface.
2. Check the sieve pressing device every shift, if it is loose, it should be pressed.
3. Check the sealing strip frequently, and replace it in time if it is found to be worn or defective.
4. The sieve grid should be taken out frequently, and regularly check whether the sieve surface is damaged or uneven, whether the sieve hole is blocked, etc.
5. Check whether the connection of the feed box is loose every shift. If the gap becomes large, it will cause collision and break the equipment.
6. Although the vibrating screen does not need lubricating oil, it still needs to be overhauled once a year, replace the liner, and repair the two screen surfaces. The vibration motor should be disassembled for inspection, and the oil should be changed for the motor bearing. If the bearing is damaged, it should be replaced
7. Check the support device of the sieve body every shift, and observe whether the hollow rubber pads have obvious deformation or degumming. When the rubber pads are damaged or flattened, replace the two hollow rubber pads at the same time.
The daily maintenance of the vibrating screen includes the screen surface, the vibrating screen, especially the fastening of the screen surface, and the vibrating screen should be tightened in time when it is loose. Clean the surface of the vibrating sieve regularly. The vibrating sieve should repair, derust and paint the peeling part of the paint in time. The exposed processed surface should be coated with industrial Vaseline to prevent rust.