Knowledge of the hanger industry
Electrostatic spraying process
Spraying
Its working principle is that the plastic powder is charged through high-voltage electrostatic equipment, and under the action of the electric field, the paint is sprayed on the surface of the workpiece, and the powder will be evenly adsorbed on the surface of the workpiece to form a powdery coating; The powdered coating is leveled and cured after high-temperature baking, and the plastic particles melt into a layer of dense final protective coating with different effects. Firmly adheres to the surface of the workpiece.
Surface treatment
Spraying and painting both belong to painting and belong to OMD (film decoration).
01
Product features
mainly used in: dry cleaners, laundry chains, laundry factories
02
Category
it is generally a disposable hanger, which belongs to laundry consumables
03
Material required
cold drawing, electrostatic spraying powder.
04
Equipment required
Wire hanger forming machine
Semi-automatic or fully automatic spraying cabinet
Low temperature leveling oven
1. No thinner material required;
2. The construction is non-polluting to the environment and non-toxic to the human body;
3. Excellent coating appearance quality, strong adhesion and mechanical strength; Short curing time for spraying construction;
4. The corrosion and wear resistance of the coating is much higher; No primer required; The construction is simple and the technical requirements for workers are low;
5. The cost is lower than the painting process;
6. There will be no common flow phenomenon in the painting process during electrostatic powder spraying.
Excellent coating
non-polluting to the environment
Awesome and Creative Design.
Low cost
